316 Stainless Steel Seamless Pipe

316 stainless steel seamless pipe is a long strip of steel with hollow section and no joints around it. It has the following production steps: 1 Round steel preparation; 2. Heating; 3. Hot rolling perforation; 4. Head cutting; 5. Pickling; 6. Grinding; 7. Lubrication; 8. Cold rolling processing; 9. Degreasing; 10. Solution heat treatment; 11. Straightening; 12. Pipe cutting; 13. Pickling; 14. Finished product inspection.

316 seamless pipe product features：

1. The thicker the wall thickness of stainless steel seamless pipe is, the more economical and practical it is. The thinner the wall thickness is, the higher its processing cost will be;

2. The process of stainless steel seamless pipe determines its limited performance. Generally, the accuracy of seamless steel pipe is low: uneven wall thickness, low brightness on the inner and outer surface of the pipe, high cost of sizing, and pitting and black spots on the inner and outer surface are not easy to remove;

3. The detection and shaping of stainless steel seamless pipe must be handled offline. Therefore, it embodies its advantages in high pressure, high strength and mechanical structure materials.

Application field of 316 seamless pipe：

1. Seamless pipe for structure; 2. Seamless pipe for fluid transmission; 3. Seamless tubes for low and medium pressure boilers; 4. Seamless pipe for high pressure boiler; 5. High pressure seamless pipe for chemical fertilizer equipment; 6. Seamless pipe for petroleum cracking; 7. Stainless steel seamless pipe for fluid transmission; 8. seamless pipe for diamond core drilling; 9. Marine carbon steel seamless pipe; 10. Seamless pipe for automobile half shaft sleeve pipe; 11. Cold drawn or cold rolled precision seamless pipe; 12. Precision inner diameter seamless pipe for hydraulic and pneumatic cylinder barrel; 13. Cold drawn or cold rolled precision seamless pipe

Size and allowable deviation of 316 stainless steel seamless pipe：

28GA=0.015inches=0.38mm

26GA=0.018inches=0.46mm

24GA=0.024inches=0.61mm

22GA=0.030inches=0.76mm

20GA=0.036inches=1.00mm

18GA=0.048inches=1.25mm

16GA=0.060inches=1.60mm

14GA=0.075inches=2.00mm

12GA=0.105inches=2.70mm